I2C adapter for TeraRanger One distance sensor

I2c Connections

Extend your TeraRanger One sensor compatibility with I2C interface! Ensures plug’n play connection with Pixhawk autopilots.

The I2C adapter cable allows direct connection between the TeraRanger One sensor and an I2C-supported device, taking care of voltage level translation and of supplying the sensor with power. Allows TeraRanger One compatibility with Pixhawk and APM flight controllers.
Sale!
Total: 40.00 10.00 ex. VAT
Find reseller

Key product features

  • Compatible with TeraRanger One sensors
  • Allows distance data stream to I2C-supported device
  • Ensures direct use with Pixhawk and APM flight controllers
  • Compatible with 3S or 4S LiPo batteries
  • Controls voltage level translation

1 I2c Adapters For Teraranger One Distance Sensor

Add an I2C interface to your TeraRanger One

The TeraRanger I2C adapter allows easy connection of TeraRanger One to an I2C port or hub and takes care of voltage level translation and of supplying the TeraRanger sensor with power. Compatible with 3S or 4S LiPo batteries (12-16V).

We developed this for direct use with Pixhawk and APM flight controllers via the I2C bus. Once connected to the flight controller the TeraRanger sensor is automatically recognized by the autopilot firmware.

N.B. All TeraRanger One sensors from serial number 1512 xxx and above are ready for operation with I2C. For serial numbers 1508 xxx and lower it is necessary to flash an I2C specific firmware to your sensor. This is available free of charge. Send an email to [email protected] with your sensor serial number(s) requesting the I2C firmware and we will email it to you. Then use your TeraRanger USB adapter to flash the I2C firmware to your sensor.
Read the user manualRead the user manual

Related Products and Accessories

0
My Cart