USB Backboard for TeraRanger Evo sensors

USB interface board Usb Backboard

Clip on, interchangeable interface board to connect TeraRanger Evo sensor modules to USB devices

USB Backboard is an easy to clip-on interface board, compatible with all sensor modules of TeraRanger Evo family. The lightweight board allows connection between Evo sensors and a USB-supported device, ensuring quick tests on a PC and streaming distance data via our graphical user interface.
Total: 25.00 ex. VAT
Find reseller

USB Backboard key product features

  • Compatible with TeraRanger Evo family sensor modules
  • Lightweight design - only 3 grams!
  • Ensures data stream between Evo sensors and a USB-supported device
  • Provides power management capabilities
  • Comes with a USB cable (50cm)
  • Allows quick and easy tests on PC via a graphical user interface
  • Simple clip on design for quick interface swap

5 Evo 60m Evaluation Kit Long Range Tof

Why buy a USB backboard for your TeraRanger Evo sensor module?

TeraRanger Evo sensors consist of an optoelectronic sensing device (black module) and a choice of the backboard (yellow unit), which simply plugs-in to provide the sensor with its communication link and power management capabilities without the need for adapters or complex wiring. You simply choose the backboard that best suits your application and communication protocol! USB, I2C and UART backboards are available.

For first time users, we recommend the USB backboard as it allows quick tests on PC with our graphical user interface. This setup is also required for possible firmware updates in the future.

Our USB backboard is compatible with the following sensor modules: TeraRanger Evo 60m, TeraRanger Evo 3m, TeraRanger Evo 600Hz, TeraRangerEvo 64px, TeraRanger Evo Thermal 33°, TeraRanger, and Evo Thermal 90°.

Our USB Backboard also comes packaged with a 50cm USB 2.0 cable.

Frequently Asked Questions

Why do I need a USB backboard?

The USB interface allows you to connect your sensor module to a PC and test it out of the box with our GUI software. You will also need the USB interface to update your firmware. We highly recommend you get at least one USB backboard.

Why buy a backboard for each TerRanger Evo sensor?

To function, each TeraRanger Evo unit requires a backboard interface to ensure power supply and a communication interface. We offer I2C/UART and USB interfaces for all TeraRanger Evo sensors. We also sell the TeraRanger Hub Evo interface to connect up to 8 TeraRanger Evo 60m, Evo 600Hz or Evo 3m of the same-type to a TeraRanger Hub Evo board using Flat Flex Cables. This allows you to build your own sensor module array.

Related Products and Accessories

0
My Cart